cpu_load_percent + memory/disk columns were silently added inline to the
hwmon migration entry, but PRAGMA user_version had already passed that
index for existing deploys → ALTER never ran → replaceKioskKey and
heartbeat hit "no such column: cpu_load_percent" on upgrade. Append a
tail migration that addColumnIfNotExists for each. Lesson: never mutate
an existing migration entry; always append a new one.
ONVIF cams legitimately have multiple streams (main+sub) stored in
camera_streams. Dropping the type gate synthesized a single "main"
row for ONVIF cams that lacked rows, hiding the multi-stream design
the kiosk's pick_stream relies on (area >= 0.2 → main, else sub).
The "(no stream)" symptom is a partial-import bug to chase separately;
the bundle fallback is for single-URL RTSP cams only. Also drop the
backfill migration that did the same insert at the DB layer.
ONVIF-imported cameras with rtsp_url but no camera_streams rows showed
"(no stream)" in the kiosk because the bundle fallback was gated to
type=rtsp only. Drop the type check + backfill existing rows so old
imports get a main stream row created.
feat(kiosk-mgmt): report hostname + all network interfaces
Behind Docker/Angie the server only saw the proxy bridge IP (172.31.0.2).
Kiosk now shells `ip -j addr show`, reports every non-loopback IPv4/v6
with CIDR, MAC, and operstate. Plus `hostname` for verifying that
managed-config applies landed. Admin UI renders interface list with
LAN IPs preferred for the copy-paste local-LAN endpoint.
feat(managed-config): auto-sync hostname from kiosk name
When admin renames a managed-image kiosk, slugify the name → DNS-safe
hostname and bump managed_config_version so the kiosk applies it on
next heartbeat. Empty form hostname now falls back to slug too, so
DHCP shows the friendly name.
feat(events): forward firmware + OS update outcomes as kiosk.log
Kiosk POSTs `/api/kiosk/event` with topic=kiosk.log on firmware-apply
attempts. Server-side firmware/os-update endpoints also insert into
event_log so admins can audit upgrades without correlating per-source.
Wire schema heartbeat gains reported_hostname + network_interfaces for
Rust import parity.
Kiosks running our pre-built image (managed_image=true at pairing) can
have their hostname, timezone, network (DHCP/static + VLAN), and Wi-Fi
configured from the admin UI. Pull-model: server stores desired-state
JSON, kiosk heartbeat returns pending_config when version exceeds
applied_version, kiosk echoes applied_version back. Wi-Fi PSK encrypted
with the cluster key so ciphertext at rest is shipped to the kiosk
without per-kiosk re-encryption.
Server side only — kiosk Rust applier (betterframe-apply-config helper
+ rollback timer) and pair-initiate marker file are next.
ci(pi-gen): use action's image-path output for asset upload
pi-gen writes the .img.xz into pi-gen-action's own working dir, not our
repo deploy/. Glob never matched. Use steps.pigen.outputs.image-path
directly — no glob needed.
Kiosk now exposes :18090 with two surfaces:
- GET /local/layout/:id?key=<kiosk_local_key>
Bookmark-friendly layout switch on this kiosk. Auth = kiosk-generated
local key (32 random bytes, hex, stored at <state_dir>/local.key).
- ANY /proxy/* — forwards to BF server with the request's Authorization
header preserved. Lets LAN clients reach a cloud-hosted BF server via
the kiosk's local socket; kiosk adds no auth of its own.
Heartbeat reports {local_key, local_port}; kiosks table grows
local_key/local_port/local_last_ip columns. Admin kiosk edit page now
shows the local URLs as a copy-paste block.
Override port: BF_KIOSK_LOCAL_PORT. Disable: BF_KIOSK_LOCAL_DISABLE=1.
Kiosk heartbeat reports local display positions so the server can sync physical outputs without consuming global display indices.
Migrate displays.index away from global uniqueness because display numbering is only meaningful within a kiosk.
is_enabled column on displays (default 1). Disabled displays are filtered
from the kiosk bundle so the kiosk never opens a window on them. Admin
edit page exposes a checkbox; list page shows a "disabled" badge.
Multi-display:
- Bundle ships displays[] each with own layouts + idle/sleep
- Rust kiosk creates one ApplicationWindow per gdk monitor
- Per-display state (layout, idle, sleep) via HashMap
- WARM_CAMERAS pool shared across displays
- Backward-compat top-level display/layouts still emitted
System Health (/admin/health):
- Online status, CPU temp (color-coded), fan RPM/PWM
- Bundle version mismatch detection
- 30s auto-refresh
Camera snapshot/test:
- shared/snapshot.ts: ffmpeg/gst-launch fallback, 5s timeout
- /admin/entities/:id/snapshot returns JPEG
- EntityEditPage shows live preview with Refresh
GPIO (Pi buttons/sensors):
- kiosk_gpio_bindings table + CRUD admin UI
- Bundle ships gpio_bindings[]
- kiosk/src/gpio.rs with gpiod crate, worker thread per pin
- Edge events POST to /api/kiosk/event with source_type=gpio
Layout switch fixes:
- GET aliases added so direct URL hits work
- New /admin/displays/:displayId/layout/:layoutId for multi-display
- DisplayEditPage gets "Switch Layout Now" section
Node-RED embed:
- /admin/nodered renders iframe at /nrdp/
- Sandbox attrs allow scripts/forms/popups
- Sidebar link now opens embedded view
Entities:
- New entities table — id, name, type (camera|html|web), camera_id,
html_content, web_url
- Auto-create entity per camera on createCamera
- Layout cells reference entity_id (replaces inline content_type/
camera_id/html_content/web_url)
- Bundle resolves entities back to legacy cell fields for kiosk compat
(Rust kiosk unchanged)
- Full CRUD: /admin/entities, /admin/entities/new, /admin/entities/:id
- Cell editor: single entity dropdown with type badges
ONVIF discovery:
- /admin/cameras/discover — host/port/user/pass form
- Server queries ONVIF device, lists profiles with name/resolution/
encoding/framerate
- "Add" creates camera + main stream from chosen profile
- shared/onvif.ts: minimal SOAP+UsernameToken+PasswordDigest client
(no external dep)
- Camera new form simplified to RTSP-only with discover link
- Migrations now run exactly once per DB lifetime, tracked via
SQLite's user_version PRAGMA
- Re-runs become no-ops after schema reaches target version
- v0.2 also made defensive — skips if template_id already dropped
Fixes "no such column: layouts.template_id" on second startup after
v0.5 rebuild dropped the legacy columns.
- Cells own position directly (row/col/row_span/col_span)
- Drop regions JSON from layouts (cells ARE the regions)
- Drop is_default from layouts (display.default_layout_id owns)
- Drop grid_cols/grid_rows from layouts (computed from cells)
- Layout new form: name, description, priority, resets_idle_timer only
- Layout edit: visual grid builder, + buttons on cell edges,
click cell to assign content
- Bundle cells now carry position directly
- Rust kiosk attaches widgets using cell position
- Migration v0.4: backfills cell positions from old region map
- Eliminated layout_templates as separate entity — regions/grid now
live directly on layouts
- Displays created from kiosk pairing (not standalone), each display
has kiosk_id FK
- Removed Templates from sidebar nav and all template routes/pages
- Layout creation uses preset buttons (fullscreen, 2x2, 1+3, 3x3)
that set regions directly on the layout
- Setup no longer creates default display/layout (deferred to pairing)
- Pairing creates HDMI-0 display for new kiosk
- Bundle reads regions from layout directly, no template lookup
- Rust kiosk updated to match new bundle format
- DB migration adds regions/grid_cols/grid_rows to layouts, kiosk_id
to displays, copies existing template data
