cpu_load_percent + memory/disk columns were silently added inline to the
hwmon migration entry, but PRAGMA user_version had already passed that
index for existing deploys → ALTER never ran → replaceKioskKey and
heartbeat hit "no such column: cpu_load_percent" on upgrade. Append a
tail migration that addColumnIfNotExists for each. Lesson: never mutate
an existing migration entry; always append a new one.
ONVIF cams legitimately have multiple streams (main+sub) stored in
camera_streams. Dropping the type gate synthesized a single "main"
row for ONVIF cams that lacked rows, hiding the multi-stream design
the kiosk's pick_stream relies on (area >= 0.2 → main, else sub).
The "(no stream)" symptom is a partial-import bug to chase separately;
the bundle fallback is for single-URL RTSP cams only. Also drop the
backfill migration that did the same insert at the DB layer.
ONVIF-imported cameras with rtsp_url but no camera_streams rows showed
"(no stream)" in the kiosk because the bundle fallback was gated to
type=rtsp only. Drop the type check + backfill existing rows so old
imports get a main stream row created.
feat(kiosk-mgmt): report hostname + all network interfaces
Behind Docker/Angie the server only saw the proxy bridge IP (172.31.0.2).
Kiosk now shells `ip -j addr show`, reports every non-loopback IPv4/v6
with CIDR, MAC, and operstate. Plus `hostname` for verifying that
managed-config applies landed. Admin UI renders interface list with
LAN IPs preferred for the copy-paste local-LAN endpoint.
feat(managed-config): auto-sync hostname from kiosk name
When admin renames a managed-image kiosk, slugify the name → DNS-safe
hostname and bump managed_config_version so the kiosk applies it on
next heartbeat. Empty form hostname now falls back to slug too, so
DHCP shows the friendly name.
feat(events): forward firmware + OS update outcomes as kiosk.log
Kiosk POSTs `/api/kiosk/event` with topic=kiosk.log on firmware-apply
attempts. Server-side firmware/os-update endpoints also insert into
event_log so admins can audit upgrades without correlating per-source.
Wire schema heartbeat gains reported_hostname + network_interfaces for
Rust import parity.
Kiosks running our pre-built image (managed_image=true at pairing) can
have their hostname, timezone, network (DHCP/static + VLAN), and Wi-Fi
configured from the admin UI. Pull-model: server stores desired-state
JSON, kiosk heartbeat returns pending_config when version exceeds
applied_version, kiosk echoes applied_version back. Wi-Fi PSK encrypted
with the cluster key so ciphertext at rest is shipped to the kiosk
without per-kiosk re-encryption.
Server side only — kiosk Rust applier (betterframe-apply-config helper
+ rollback timer) and pair-initiate marker file are next.
ci(pi-gen): use action's image-path output for asset upload
pi-gen writes the .img.xz into pi-gen-action's own working dir, not our
repo deploy/. Glob never matched. Use steps.pigen.outputs.image-path
directly — no glob needed.
Adds aggressive normalisation to tryParsePrivateKey:
- Strip UTF-8 BOM
- Replace smart quotes (" " ' ') with ASCII
- Strip multiple layers of wrapping quotes
- Combine escape-unfold with quote-strip (env vars that quote AND escape)
- Strip whitespace inside base64 candidate before decode
On parse failure, dumps length + head/tail samples + first-byte hex so
the operator can spot exactly what shape the env var arrived in.
Coolify / docker compose env injection routinely strips real newlines or
wraps in quotes, causing createPrivateKey to throw ERR_OSSL_UNSUPPORTED
and crashing the server before it can even start.
tryParsePrivateKey now attempts: literal, \n→LF, CRLF→LF, quote-stripped,
base64-decoded, and single-line PEM re-wrapped to 64-col. On total
failure, logs a clear warning and falls back to on-disk / generated key
instead of crashing.
Kiosk now exposes :18090 with two surfaces:
- GET /local/layout/:id?key=<kiosk_local_key>
Bookmark-friendly layout switch on this kiosk. Auth = kiosk-generated
local key (32 random bytes, hex, stored at <state_dir>/local.key).
- ANY /proxy/* — forwards to BF server with the request's Authorization
header preserved. Lets LAN clients reach a cloud-hosted BF server via
the kiosk's local socket; kiosk adds no auth of its own.
Heartbeat reports {local_key, local_port}; kiosks table grows
local_key/local_port/local_last_ip columns. Admin kiosk edit page now
shows the local URLs as a copy-paste block.
Override port: BF_KIOSK_LOCAL_PORT. Disable: BF_KIOSK_LOCAL_DISABLE=1.
Three related fixes:
1. Idle reverts (and any other kiosk-initiated layout switch) now POST
layout.changed to /api/kiosk/event. Previously the server only emitted
on admin-initiated switches, so Node-RED never saw the idle revert.
2. Server's /api/kiosk/event splays the payload to the top level when
the topic has a dedicated trigger node (layout.changed, kiosk.changed,
kiosk.status, display.power.changed, camera.changed). The trigger
nodes expect flat shapes matching the admin emit; the old wrapped
shape left every field undefined.
3. Auto-provisioning of bf-server-config in Node-RED: extend retry
window to ~5 min, log per attempt, force v2 API + full-deploy header
so credentials inline get accepted, surface response body on failure.
Kiosk heartbeat reports local display positions so the server can sync physical outputs without consuming global display indices.
Migrate displays.index away from global uniqueness because display numbering is only meaningful within a kiosk.
Server mints a dedicated admin API key on first boot (persisted plaintext
encrypted in setup_state.extras) and POSTs a bf-server-config node into
Node-RED's flow graph via /nrdp/flows. Idempotent — skips if any
bf-server-config already exists, so user-owned configs win.
New admin-http config 'selfUrl' (defaults to http://127.0.0.1:18080)
tells Node-RED how to reach the BF server. Docker compose sets it to
http://server:18080 so requests stay inside the compose network.
is_enabled column on displays (default 1). Disabled displays are filtered
from the kiosk bundle so the kiosk never opens a window on them. Admin
edit page exposes a checkbox; list page shows a "disabled" badge.
Trigger nodes now self-contained inputs (inputs:0):
- Each registers POST /api/internal/<topic> on RED.httpNode
- Angie returns 404 for any /api/* not whitelisted (kiosk/pair/admin)
so external requests cannot trigger BF nodes
- Server bridge POSTs direct to nodered container (bypasses Angie)
- nodered-bridge.ts updated to use /api/internal/<topic>
- 6 trigger nodes converted: display-power, layout-changed,
kiosk-changed, camera-changed, status, kiosk-camera-event
- Optional per-node filters (display_id, kiosk_id, camera_id)
- close handler removes only this node's route layer
- bf-status: query kiosk state by ID via /api/admin/kiosks/:id
- bf-trigger-status: dedicated heartbeat-only topic kiosk.status
(skips connect/disconnect noise from kiosk.changed)
- bf-snapshot: GET /admin/entities/:id/snapshot as Buffer for
motion → email/telegram flows
- coordinator-ws now forwards both kiosk.changed (event=heartbeat)
AND kiosk.status on every status message
Action buttons that don't need a redirect now use hx-post:
- Kiosk power (wake/standby), fan (auto/off/50%/full)
- Kiosk switch-layout dropdown
- Kiosk GPIO delete (row swap-out)
- Camera labels add/remove (list re-render)
- Kiosk labels add/remove (list re-render)
- Display attach/detach layout (list re-render)
Server routes return HTML fragments via isHtmxRequest() check,
otherwise still 302 redirect for direct-URL access.
Forms that legitimately redirect (create/edit/delete, auth flows)
stay as standard form posts.
- Dockerfile.server: RUN npm run build during builder stage so the
image ships pre-compiled lib/ + bsb-plugin.json. Runtime image also
installs ffmpeg (for camera snapshot endpoint).
- DisplayEditPage Show buttons + Switch dropdown now use hx-post
with hx-swap=none — no page reload, just fires the command.
Multi-display:
- Bundle ships displays[] each with own layouts + idle/sleep
- Rust kiosk creates one ApplicationWindow per gdk monitor
- Per-display state (layout, idle, sleep) via HashMap
- WARM_CAMERAS pool shared across displays
- Backward-compat top-level display/layouts still emitted
System Health (/admin/health):
- Online status, CPU temp (color-coded), fan RPM/PWM
- Bundle version mismatch detection
- 30s auto-refresh
Camera snapshot/test:
- shared/snapshot.ts: ffmpeg/gst-launch fallback, 5s timeout
- /admin/entities/:id/snapshot returns JPEG
- EntityEditPage shows live preview with Refresh
GPIO (Pi buttons/sensors):
- kiosk_gpio_bindings table + CRUD admin UI
- Bundle ships gpio_bindings[]
- kiosk/src/gpio.rs with gpiod crate, worker thread per pin
- Edge events POST to /api/kiosk/event with source_type=gpio
Layout switch fixes:
- GET aliases added so direct URL hits work
- New /admin/displays/:displayId/layout/:layoutId for multi-display
- DisplayEditPage gets "Switch Layout Now" section
Node-RED embed:
- /admin/nodered renders iframe at /nrdp/
- Sandbox attrs allow scripts/forms/popups
- Sidebar link now opens embedded view
Bind native backend services and Node-RED to loopback so Angie remains the public auth boundary. Keep Docker on an internal compose network and stop kiosk fallback to a layout when display default is none.
Entities:
- New entities table — id, name, type (camera|html|web), camera_id,
html_content, web_url
- Auto-create entity per camera on createCamera
- Layout cells reference entity_id (replaces inline content_type/
camera_id/html_content/web_url)
- Bundle resolves entities back to legacy cell fields for kiosk compat
(Rust kiosk unchanged)
- Full CRUD: /admin/entities, /admin/entities/new, /admin/entities/:id
- Cell editor: single entity dropdown with type badges
ONVIF discovery:
- /admin/cameras/discover — host/port/user/pass form
- Server queries ONVIF device, lists profiles with name/resolution/
encoding/framerate
- "Add" creates camera + main stream from chosen profile
- shared/onvif.ts: minimal SOAP+UsernameToken+PasswordDigest client
(no external dep)
- Camera new form simplified to RTSP-only with discover link
- shared/nodered-bridge.ts: fire-and-forget POST to Node-RED HTTP-in
- api-http: kiosk event endpoint now forwards to Node-RED at /in/<topic>
- Best-effort, never blocks. 3s timeout, warn on failure.
- sec-config: noderedUrl on api-http (defaults to http://127.0.0.1:1880)
Node-RED flows can attach http-in nodes at /in/<topic> to receive
camera motion, GPIO events, etc. Inbound commands (Node-RED → server)
go through the admin API with admin Bearer token (no new endpoints
needed for v0.1).
